system setup
ON-SCREEN MENU NAVIGATION
The on-screen menus allow you to enable or disable various functions on your DVD Recorder.
Press the MENU button to open the on-screen menu and then use the following buttons to navigate through the on
screen menus.
▲▼ Buttons
1.
Press these buttons on the remote control to move the selection
bar ▲▼ to cycle through the menu options.
2.
ENTER Button
Press this button on the remote control to confi rm any new settings.
3.
RETURN Button
Press this button on the remote control to return to the previous
menu screen displayed or to exit the on-screen menu.
4.
EXIT Button
Press this button to exit the on-screen menu.
EASY SETUP
After plugging in the recorder, the fi rst time you press the POWER button, easy setup comes up.
You can set this menu by using setup menu.
Follow the steps below to make the minimum number of basic adjustments for using the recorder.
Settings are made in the following order.
1.
With the unit in Stop mode, press the MENU button.
Press the ▲▼ buttons to select Setup, then press the ENTER
2.
button.
Press the ▲▼ buttons to select Easy Setup, then press the
3.
ENTER button.
The message "Follow the guide to make initial settings. Before
you start, Check that you have made all necessary connections."
is displayed.
Press the ◄ ► buttons to select Start.
4.
5.
Press the ENTER button.
The setup display for selecting the language used in the
on-screen display appears.
Press the ▲▼ buttons to select the desired language, then press
6.
the ENTER button.
The message "Press [ENTER] to start scanning Analog channels."
Timer
Title List
Timer - Standard
Timer List
Timer
Edit
Disc
Setting
Setup
> Move
sEnter
rReturn
Setup
Title List
Tuner Preset
Clock Set
Timer
Video
Edit
Audio
Disc
Features
Setting
Options
Setup
Easy Setup
> Move
sEnter
rReturn
Easy Setup
Select the screen language.
Portuguese
✔ English
Español
> Move
sEnter
rReturn
Easy Setup
Press [ENTER] to start scanning
Analog channels.
Start
sEnter
rReturn
English _25
12:00
eExit
12:00
eExit
12:00
eExit
12:00
eExit