LEXIBOOK SC300 Manuel D'utilisation page 41

All manuals and user guides at all-guides.com
Replacement Procedure
1. Turn the power off by pressing [2ndF] [OFF].
2. Open the battery compartment using a screwdriver. Remove the 2 screws.
2. Remove used batteries.
3. Install two new batteries and make sure the "+" side facing up.
5. Press the RESET switch (on the back.)
6. Make sure that the display appears as shown below. If the display does not appear as shown,
remove the batteries reinstall them and check the display once again.
DEG
0.
41
SC300_02IM0186.indd 41 09/05/2006 10:31:57