LG 50UR762H Serie Manuel Du Propriétaire page 31

12 Remote Control Lock Mode (Command: k m)
►To lock the front panel controls on the monitor and remote control.
Transmission
(k)(m)( )([Set ID])( )([Data])(Cr)
[Data] 00 : [Off]
[Data] 01 : [On]
Ack
(m)( )([Set ID])( )(OK/NG)([Data])(x)
* If you are not using the remote control, use this mode. When main
power is on/off, external control lock is released.
* In the standby mode, if key lock is on, TV will not turn on by power on
key of IR & Local Key.
13 [Balance] (Command: k t)
►To adjust balance.
You can also adjust balance in the audio settings.
Transmission
(k)(t)( )([Set ID])( )([Data])(Cr)
[Data] L : 00 to R : 64
* Refer to "Real data mapping".
Ack
(t)( )([Set ID])( )(OK/NG)([Data])(x)
14 [Colour Temperature] (Command: x u)
►To adjust Colour Temperature. You can also adjust Colour
Temperature in the picture settings.
Transmission
(x)(u)( )([Set ID])( )([Data])(Cr)
[Data] Warm: 00 to Cool:64
* Refer to "Real data mapping".
Ack
(u)( )([Set ID])( )(OK/NG)([Data])(x)
15 [Energy Saving] (Command: j q)
►To reduce the power consumption of the TV. You can also adjust
Energy Saving in picture settings.
Transmission
(j)(q)( )([Set ID])( )([Data])(Cr)
Power Saving
Function
7 6 5 4
Low
0 0 0 0
Power
Low
0 0 0 0
Power
Low
0 0 0 0
Power
Low
0 0 0 0
Power
Low
0 0 0 0
Power
Low
0 0 0 0
Power
►[Auto] is available in TV that supports 'Intelligent Sensor' .
Ack
(q)( )([Set ID])( )(OK/NG)([Data])(x)
16 Auto Configuration (Command: j u) (Only RGB support model)
►To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission
(j)(u)( )([Set ID])( )([Data])(Cr)
[Data] 01 : To set
Ack
(u)( )([Set ID])( )(OK/NG)([Data])(x)
Level
Description
3 2 1 0
0 0 0 0 [Off]
0 0 0 1 [Minimum]
0 0 1 0 [Medium]
0 0 1 1 [Maximum]
0 1 0 1 [Screen Off]
0 1 0 0 [Auto]
31