Publicité
Les langues disponibles
Les langues disponibles
EN
User Manual
Wireless charging pads
1
Safety Instructions
The user manual is part of the product and contains important informati-
on for correct use.
•
Read the user manual completely and carefully before use.
The user manual must be available for uncertainties and passing the
product.
•
Keep this user manual.
•
Compare the specifications of all used devices to ensure
compatibility.
•
Not meant for children.
•
Do not open the housing.
•
In case of questions, defects, mechanical damage, trouble
and other problems, non-recoverable by the documentation,
contact your dealer or producer.
•
Do not modify or alter products, product parts and accesso-
ries constructively.
•
Avoid stresses such as heat and cold, moisture and direct
sunlight, vibration and mechanical pressure.
•
Only use in dry ambience.
Magnetism
The product contains magnetic materials.
•
Regarding the compatibility with implanted medical devices,
consult a doctor before use.
•
Keep a minimum distance of 20 cm to medical equipment.
•
Do not store or operate near bank cards.
Risk of stumbling
•
Place, install and transport product, product parts and acces
sories in a safe way.
2
Description and Function
2.1
Wireless charging pad
This product is a wireless charging pad for charging mobile devices such as mobile
phones or camaras via wireless induction. The wireless charging pad can be char-
ged via the USB charging cable to PC, USB charging adapter or USB car charger.
2.2
Scope of delivery
Wireless charging pad 59877 or 59878, USB charging cable, User manual
2.3
Operating elements
59878
1 Induction coils / shelf
2 LED for standby and charging state
3 Micro-USB input
2.4
Specifications
Wireless charging pad
Connections
Input
Output
Frequency band
wireless charging distance
minimum distance to medical devices
Dimensions
Weight
Colour
USB charging cable
Connectors
Cable length
REV2018-04-17
V2.0
1
2
59877
3
59877
59878
Micro-USB input (IN),
wireless charging interface
5 V
, 2 A min
5 V
, 1 A (ind., max.)
105-205 kHz
max. 2-8 mm
20 cm
Ø68 x 11 mm
40 g
black
white
Micro-USB plug,
USB-A plug
1.0 m
3
Intended Use
We do not permit using the device in other ways like described in chapter
"Description and Function". Not attending to these regulations and safety
instructions might cause fatal accidents, injuries, and damages to
persons and property.
4
Preparing
•
Compare the specifications of all used devices to ensure compatibility.
•
Check the scope of delivery for completeness and integrity.
5
Connecting, placing and charging
1.
Place the wireless charging pad onto a plane, horizontal surface.
2.
Plug the USB charging cable into the input (IN) of the wireless charging
pad and into the USB charging socket of
- a USB charging adaptor,
- a PC or
- an USB car charger with min. 2 A output current.
The LED flashes 3 times blue after connecting and then switches off.
Thereafter, the device enters standby mode.
3.
Place a Qi standard-able device onto the wireless charging pad.
The LED
- shines blue, when the device is recognized and charges.
- flashes, when the charging position of the device is improper.
•
Move the device a little back and forth until the LED shines blue.
4.
Check the charging state of your device by its status display.
5.
Remove all cable connections after use.
6
Maintenance and Cleaning
The product is maintenance-free.
•
Clean only with a dry, soft cloth.
•
Do not use cleaning agents and chemicals.
•
Store cool and dry.
•
Store the product out the reach of children and in a dry and dust-protec-
ted ambience when not in use.
•
Keep and use the original packaging for transport.
7
Disposal Notes
We reserve the right to printing errors and changes to product, packaging
or product documentation.
•
See our terms of warranty. These are available in their current form under
the given contact details.
8
Disposal Notes
According to the European WEEE directive, electrical and electronic
equipment must not be disposed with consumers waste. Its components
must be recycled or disposed apart from each other. Otherwise contami
native and hazardous substances can pollute our environment.
As a consumer, you are committed by law to dispose electrical and electronic de-
vices to the producer, the dealer, or public collecting points at the end of the devices
lifetime for free. Particulars are regulated in national right. The symbol on the pro-
duct, in the user`s manual, or at the packaging alludes to these terms. With this kind
of waste separation, application, and waste disposal of used devices you achieve an
important share to environmental protection.
WEEE No: 82898622
9
EU Declaration of Conformity
With the CE sign Goobay®, a registered trademark of the Wentronic GmbH ensures,
that the product is conformed to the basic European standards and directives.
- 2 -
59877/59878
Goobay
by Wentronic GmbH | Pillmannstraße 12
38112 Braunschweig | Germany
®
Publicité
