Aqua Medic Ocean Light T5 Percula Mode D'emploi page 9

Steel cable suspension:
1.1 Ceiling suspension
1.2 Stopper at the stainless steel cable
1.3 Retaining bush for ceiling suspension
2.1 Light fixing
4.3 Assembling/changing the fluorescent lamps
For assembling the fluorescent lamps, the cover plates are pushed out from the light. Now, the
lamps can be set in or exchanged. Subsequently, the cover plates have to be put in again.
Electrical connection:
The Ocean Light T5 can be connected to any safety socket or to one or more timers if automatic
operation is desired.
When working on the light, always pull all power supply plugs!
5. Maintenance and Care
The T5 lamps have a life span of approx. 10,000 hours. This corresponds to around 2 years with a
daily illumination time of 10 hours. It is recommended to replace the bulbs before this time
because performance and colour composition change towards the end of the life span.
Clean the filter glass regularly (caution: let it cool down!) from residues from water splashes and
evaporation with a moistened cloth. Never use additional cleansing agents!
6. Warranty
Should any defect in material or workmanship be found within 12 months of the date of purchase
AB Aqua Medic GmbH undertakes to repair or, at our option, replace the defective part free of
charge – always provided the product has been installed correctly, is used for the purpose that was
intended by us, is used in accordance with the operating instructions and is returned to us carriage
paid. The warranty term is not applicable on the all consumable products.
Proof of Purchase is required by presentation of an original invoice or receipt indicating the dealer's
name, the model number and date of purchase, or a Guarantee Card if appropriate. This warranty
may not apply if any model or production number has been altered, deleted or removed,
unauthorised persons or organisations have executed repairs, modifications or alterations, or
damage is caused by accident, misuse or neglect.
We regret we are unable to accept any liability for any consequential loss.
Please note that the product is not defective under the terms of this warranty where the product,
or any of its component parts, was not originally designed and / or manufactured for the market in
which it is used. These statements do not affect your statutory rights as a customer.
If your AB Aqua Medic GmbH product does not appear to be working correctly or appears to be
defective please contact your dealer in the first instance.
Before calling your dealer please ensure you have read and understood the operating instructions.
If you have any questions your dealer cannot answer please contact us.
Our policy is one of continual technical improvement and we reserve the right to modify and adjust
the specification of our products without prior notification.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
- Technical changes reserved- 10/2011
2.2 Safety bolt
2.3 Loop of Y-piece
2.1.1 Fixing screw for release
2.1.2 End of the cable
9