Hama 00090923 Mode D'emploi page 15

g Operating Instruction
Wall mounting:
There are installation holes on the rear of the digital picture frame to attach it to the wall using suitable screws.
Picture viewing:
Insert a memory card and switch on the digital picture frame. The start screen appears after a few seconds. The
preset mode of the digital picture frame displays the photos on the memory card.
Use the ( ) buttons in the function selection menu to select the required function as follows:
Weather Station:
Display of indoor and outdoor
temperature as well as humidity,
atmospheric pressure, phase of
the moon, forecast, time and date.
System settings:
Advanced settings:
All setup/setting functions are available using the remote control. Some basic functions can be performed using the
buttons located at the top of the digital picture frame.
Setup/setting menu
Screen display duration
File description
Folder mode
Representation format
Power saving mode
Display settings
Standard settings
System information
Submenus
5, 10, 30 and 60 seconds
On
Off
On
Off
Normal/Smart/Zoom
Off
after 15 minutes
after 30 minutes
after 60 minutes
Brightness
Contrast
-
-
Card selection menu:
Selection of the memory card
detected
Functions
Slide show/image transfer speed
Display the photo/fi le name
Display of folder structures
Adjustment of the photo
on the display
Setting for automatic
standby function
Control of the brightness and con-
trast display (using < and >)
Restore default setting values
Information about the software
version
15