Meec tools 009533 Mode D'emploi page 38

EN
NOTE:
Be careful not to lose the small spring in the
spool head.
Rewinding the line spool
1. Put about 3 mm of trimmer line through
the hole in the spool.
2. Wind the trimmer line tightly and evenly
in the direction of the arrow.
NOTE:
• Only use trimmer line with a diameter of
1.2 mm.
• The line spool holds about 6.5 m of
trimmer line.
Feeding the line
Tap the feed button on the ground while the
trimmer is running to feed forward the trimmer
line.
38
MAINTENANCE
NOTE:
Remove the battery before cleaning.
• Clean the product with a cloth moistened
with a mild detergent.
• Do not immerse the product in water or
any other liquid, and do not splash with
water or any other liquid.
• Make sure no liquid gets into the product.
• Do not use a high-pressure jet to clean the
product.
STORAGE
• Remove the battery from the product after
use.
• Store the product out of the reach of
children when not in use.
• Only use parts and accessories
recommended by the manufacturer.