Hoover EmPower Mode D'emploi page 4

2-2
A
Hose connection
Hose must be attached to cleaner base for
floor cleaning.
To attach hose, use the end of the hose to
push the cover (A) down and push hose
onto opening.
Twist hose end slightly to tighten the con-
nector.
2-5
Handle positions
The handle of your cleaner has three posi-
tions; upright when using cleaning tools;
operating position for general operation
on carpet and floors; low for reaching
under low furniture. Step on handle release
pedal to lower handle.
4
2-3
B
ON-OFF-HUSH™
switch
Plug cord into electrical outlet.
To turn cleaner ON, push switch (B) up.
To turn cleaner OFF, push switch to middle
position.
For quieter vacuuming, push switch down
(HUSH) position.
Put Power Boost Switch in neutral when
using ON or HUSH setting.
2-6
Transporting cleaner
Put handle in upright position. Tilt
cleaner back on rear wheels. Push
forward.
2-4
C
Power Boost Switch
Use the Power Boost Switch (C) to add
extra cleaning power for cleaning heavily
soiled areas and for picking up dry debris
spills.
Push the switch forward for a temporary
boost. When released, the boost will auto-
matically go to the "neutral" position.
Push the switch back to lock it in the Boost
position. To unlock, push the switch for-
ward to the "neutral" position.
Use the lock position for larger areas or
when using the cleaning tools.
The Boost can be used with either the ON
or HUSH mode selected (see Fig. 2-3).
Put Power Boost Switch in neutral when
using ON or HUSH setting.
2-7
Carrying handle
Use the carrying handle to lift the
cleaner.