All manuals and user guides at all-guides.com
Using the Converter function
The Converter function consists of two converters: the Currency
converter and the Metric converter.
Note:
• There may be a slight error in the conversion result due to the
rounding off of the number. Use the result for reference only.
Currency converter
Setting a currency rate
One conversion rate can be set.
<Example>
Set the following rate: US$1 = €0.7
1. Press m 8 1 to access the
Currency converter.
2. Press <. The input fields for the
currency name and rate appear.
3. Use the { } keys to place the
cursor at the desired input field, then
input the currency name and its rate. In this example, press } and
input '0.7'.
• The currency name field of the Currency converter is temporarily
pre-defined, as seen in the above example.
• When inputting the desired currency name, press b to clear
the input field and use no more than four letters. Use the [ ]
keys to set the cursor on the left/right of the currently selected
input field.
• In the left input field, enter the base currency name. In the input
field on the right, place the currency name of which you wish to
set the conversion rate.
51