Hayward Salt & Swim 2.0+ Manuel De Demarrage Rapide page 3

QUICK START-UP USER GUIDE - SALT & SWIM
1 1
FIX YOUR DEVICE IN THE WALL
- Fix the 4 suspension eyes to the device.
- Drill the wall with the drawings.
- Hand up the device to the wall.
3 3
DOWNLOAD THE APP
- Download « Salt&Swim+ » application.
- Appair your smartphone with the device.
- Check and confirm date and hour.
5 5
CONFIGURE YOUR FILTRATION TIMER
- Enter in Filtration menu with + key.
- Select Manual or Automatic mode.
- Configure your 3 timers in Automatic mode.
Very important:
filtration has to
be actived to start
electrolysis.
7 7
CONFIGURE YOUR LIGHTING TIMER
- Enter in Lighting menu with + key.
- Select Manual or Automatic mode.
- Configure your timer in Automatic
mode.
- Select your weekly program.
- Select Next to change RGB program.
x4 x4
2 2
CONNECT THE CELL TO THE DEVICE
- Install the cell vertically, in a by-pass and at the
highest point of the pipe.
- Connect the cell and the gas detector to the device.
Cell
Probes
pH
Ø63 mm
minus
4 4
CONNECT YOUR FILTRATION PUMP
- Use dry contact FILTER PUMP to connect your
filtration pump.
With a contactor:
6 6
CONNECT YOUR LIGHTING
- Use LIGHT connector to connect your(s) lamp(s).
- You can connect various lamps to same connector.
Very important:
Alimentation
12V / 50W maximum
8 8
CONGRATULATIONS
You can manage all your
pool from your smartphone
For more information, please read our
complete manual accesible with this
2.0+
®
With an electrical box H-Power:
QR code