Safety Instructions - Extel NOMAD 13 TPS-218 Guide D'installation Et D'utilisation

SAFETY INSTRUCTIONS

1
Important!
• Please read the user manual thoroughly before installing or using this product.
• If you install this product for other people, please give the manual or a copy to the end user
Warning:
• The different elements can only be dismantled by an authorised technician. .
Safety instructions:
• To safely use this system, it is essential the fitters, users and technicians follow the safety procedures described
in this manual.
• Specific warnings and caution symbols are indicated on the elements if necessary
Warning:
Follow these instructions:
• The only connections made should be those provided in this manual: making any incorrect connections could be
dangerous and could seriously damage the system.
• In view of the risks that may arise during the installation and usage phases of the product components should be
installed in accordance with the following recommendations: Do not make any modifications of any kind to any
parts of the device unless those modifications are described in this guide. Unauthorised operation will only lead
to operating problems. The manufacturer accepts no liability for damage resulting from products that have been
modified arbitrarily.
DESCRIPTION
2
1 • 13W polycrystalline solar panel
3 • 12V LED light (cigarette lighter plug)
5 • Adapter with cigarette lighter plug
3
USAGE
a. Panel: (fig.2)
- Do not place excessive weight to the solar panel case.
- Place the panel in direct sunlight. You can adjust the angle of the panel using its mounts (a)
- Connect the cable using the charger plug «Solar DC 12V»(h). It is also possible to charge other batteries (max
7Ah) using the adapter with crocodile clips (do not short circuit).
- Set the solar panel switch «12V 24V» (b) to position 12V to charge batteries 12V.
Do not use position 24V .
b. Charger: (fig.3)
- Choose a suitable place to install your product. As far as possible, your system must be installed in a dry, dust-free
place which is not subject to high vibrations and where there is good air circulation.
- Note: on average it takes 2 days to charge a battery.
- Press the charger switch (c). The "red" indicator comes on to indicate that the battery is charging. When charging
is complete, the light goes off.
There are 3 outlets:
- 12V cigarette lighter plug (d): To connect the LED lamp provided.
- "inverter" cigarette lighter plug (e): To connect the option CONVERTY 150 (Voltage converter 12V /230V~).
The total power of the appliance to be connected must be less than 100W.
- USB socket (f): to charge appliances powered by the USB plug.
There is 1 inlet:
- In order to recharge your charger, the socket «Battery DC 12V» (g) can be connected to an external 12V batte-
ry using the adapter with crocodile clips or the adapter with cigarette lighter plug on your vehicle's cigarette lighter.
GB
All manuals and user guides at all-guides.com
CFI EXTEL NOMAD 13 - 12/2010 - V1
2 • Charger (with battery) 12V /7Ah
4 • Adapter with crocodile clips