Salora Elite 2 Manuel D'utilisation page 15

CD MODE
Calling up file information (MP3/WMA only)
You can call up file information (ID3 tag and ticker text) with this function.
1. During playback, the display switches to show the album and file name.
2. Repeatedly press the Display button to cycle through the information.
Creating a track memory
You can create a track memory of up to 60 tracks (CD-DA) or up to 60 files from different albums (MP3/
WMA) of the current CD in any order you desired and then play the tracks in that sequence. A file or
track may be stored more than once. Programming is only possible in stop mode.
Selecting and storing tracks
1. In stop mode, press the Prog. button to call up the function.
–The word "PROG" flashes during the programming.
–Display shows "P-01" for the first preset
2. Select the file/track by pressing the Rewind or Forward button.
–In MP3/WMA, you also can select the album by pressing the Up or Down button.
3. Press the Prog. button to store.
4. To store more files/tracks, repeat step 2 and 3.
Playing the track memory
1. Press the Play/Pause button to start playing. Playback begins with the first programmed file or
track.
–The word "PROG" lights on the display indicates there is a track memory.
2. Press the Play/Pause button to pause the playback, or press the Stop button to end the
playback.
3. To play the track memory again, press the Play/Pause button.
Viewing or changing the track selection
1. In stop mode, the display shows the first programmed file/track number, and the word "PROG"
flashes.
Repeatedly press the Prog. button to cycle through each preset of the track memory.
2. You can change any preset by pressing the Rewind or Forward, Up or Down button to select
a new file/track, and then press the Prog. button to confirm.
Adding files or tracks
1. In stop mode, repeatedly press the Prog. button until the track number of a preset is zero.
2. Select the track by using the Rewind or Forward, Up or Down button.
3. Press the Prog. button to save the track.
Deleting the track memory
1. In stop mode, press the Stop button, "PROG" will disappears on the display
or
Open the CD compartment.
elite2_ib.indd 15
All manuals and user guides at all-guides.com
14
1/3/2011 17:48:06