PARTS DESCRIPTION
1. Hot plate
2. Thermostat
3. Control light
BEFORE THE FIRST USE
• Take the appliance and accessories out the box.
Remove the stickers, protective foil or plastic from
the device.
• Clean the plate with a damp cloth.
• Connect the power cable to the socket. Note:
Make sure the voltage which is indicated on the
device matches the local voltage before connecting
the device. Voltage: 220-240V~ 50Hz.
• The heating plate is provided with a protective layer
which for the first use should be removed.
Switch the device and select the highest setting for
10 minutes. There may be created some smoke by
the protection which now lit the heating plate.
Then you can switch off the cooker or use it.
All manuals and user guides at all-guides.com
USE
• Turn on the hot plate (No. 1) by turning the switch (No. 2)
clockwise. The red control light (No. 3) lights up.
• You can select the desired temperature by turning
the knob clockwise, 1 for the lowest temperature and
5 for the highest level.
• If the temperature which belong to the set position is
reached, the red control light turns off.
• After the temperature dropped, the thermostat will
turn the hot plate back on again.
CLEANING
• Unplug, before cleaning, the plug from the socket
and allow the plate to cool down completely.
• Do not use toxic and abrasive cleaners such as
gasoline, scouring powder or solvent. A normal
kitchen cleaner or detergent is sufficient.
• Never immerse the appliance in water or other liquid.
• Remove the cooking residues immediately.
• Beware! The plate is hot.
ENERGY SAVING TIPS
• Use only pans with a diameter equal to the hotplate.
• Use only pots and pans with a flat bottom.
• If possible keep the lid on the pan while cooking.
• Cook vegetables, potatoes, etc. with little water
to shorten the cooking time.
• Use the correct temperatures for the different meals to
prepare.
TECHNICAL DATA
Type nr.: TM-2410
Voltage: 230V~ 50/60 Hz
Power: 1000W
Instruction manual
TM-2410
15