What To Do If - AEG DI 8610 Notice D'utilisation Et D'installation

What to do if

If your appliance fails to work properly please carry out the following checks.
Symptom
The cooker hood will not start...
The cooker hood is not working
effectively..
The cooker hood has
switched off during operation...
If after all these checks, the problem persists, contact your local Service Force Centre,
quoting the model and serial number.
Please note that it will be necessary to provide proof of purchase for any in-guarantee
service calls.
In-guarantee customers should ensure that the above checks have been made as the
engineer will make a charge if the fault is not a mechanical or electrical breakdown.
64
All manuals and user guides at all-guides.com
Solution
Check that:
The hood is connected to
the electricity supply.
Check that a fan speed has
been selected
Check that:
The fan speed is set high
enough for the task.
The grease filters are clean.
The kitchen is adequately vented to allow
the entry of fresh air.
If set up for recirculation, check that the
charcoal filter is still effective.
If set up for extraction, check that the ducting
and outlets are not blocked.
The safety cut-out device has been tripped.
Turn off the hob and then wait for the device
to reset.
If the hood has been installed below the
heights indicated in the installation
instructions the motor will cut-out frequently
which will damage the hood.