human care Leia Manuel De L'utilisateur page 4

Product Description
CE-marking
The walking-aid is CE-marked according to
the applicable directive for Medical devices.
CE-markings are placed on the chassis and
contain the following information. The rollator is
tested according to ISO 11199-2:2005 (rollator
standard) by an independent test institute.
Safety
In the instruction manual, three ways of
drawing special attention are used. These ways
are highlighted in the following manner.
Attention! Risk of personal injury or
mechanical fault.
Important! Risk of mechanical damage or
fault.
Note! Important information to improve
handling.
Recycling of products
When recycling, the product's chassis is
separated from other parts. At separation,
the parts can be sorted according to material
after unscrewing and dismantling rivets and
other connections. The different parts should
be separated into metal, plastic or combined
materials.
The products consist mainly of aluminum, metal
components and PA 6. Examples of parts witch
consist of combined materials, are the front
fork including bearings wheel with bearing.
All manuals and user guides at all-guides.com
Note! Different authorities/recycling
companies handle recycled materials in
different ways. It is thus fitting when in
any doubt over the best way to proceed
when recycling, to contact the relevant
governing body.
Environment friendliness
Human Care HC AB aids are manufactured to
have as little effect on the environment as
possible during their lifetime. This allows for
the used product to be dismantled and for its
parts to be recycled. Products with lengthy
lifecycles safeguard our sensitive environment
and are thus more environmentally friendly.
Human Care HC AB is a part of REPA. REPA – A
countrywide system for recycling of packaging.
ENG