Replacing The Battery - Wagan Tech Brite-Nite 2641 Guide D'utilisation

REPLACING THE BATTERY

1. Turn the light off and disconnect any chargers.
2. Unscrew the 2 hex screws holding the back of the light in place and
remove the back.
3. Pull out the old battery. Disconnect the Positive (+) and Negative (−)
leads.
4. Attach the leads on the replacement battery to the respective Positive
and Negative leads and place the battery into position within the light
housing.
5. Replace the back of the light and screw the 2 hex screws back in.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
All manuals and user guides at all-guides.com
User's Manual—Read before using this equipment
Battery
Negative Leads
©2013 Wagan Corporation. All Rights Reserved.
Back Cover
Positive and
Hex Screws
4