Battery Replacement - Wagan Tech Diamond LED Flare Guide D'utilisation

Flash Pattern
6 LED Flashlight
Double-Blink
Double-Pulse
Single-Blink
Rotate
Alternate
SOS Rescue (Morse Code)
Solid-On High
Solid-On Low
Red 2 LED Flashlight

BATTERY REPLACEMENT

1. Insert coin into slot on back of unit and turn counter clockwise to
loosen and remove the battery cover.
2. Install 3 AA batteries
• Replace the batteries in the proper orientation shown on the
battery holder.
• For best performance, always replace all batteries at the
same time. Do not mix old and new batteries or batteries of
different types (alkaline, heavy duty, and rechargeable).
3. Replace the battery cover and turn clockwise to tighten using a
coin to ensure a tight seal.
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
User's Manual—Read before using this equipment
©2021 Wagan Corporation. All Rights Reserved.
Maximum Run Times
5 Hours
9 Hours
9 Hours
38 Hours
9 Hours
9 Hours
15 Hours
5 Hours
28 Hours
9 Hours
4