Charging The Battery - Wagan Tech Brite-Nite 2652 Manuel

La lanterne projecteur del 10 w
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

User's Manual—Read before using this equipment
WARNING
Do not shine directly into eyes.
To reduce the risk of electrical shock, unplug the unit and allow to cool before attempting
any cleaning.
Although the unit is weather resistant, do not submerge the unit in any liquid.
OPERATION
1. Charge the unit fully prior to initial use.
2. To adjust the unit from a carrying position to a pistol-grip position, push the handle lock
button and rotate the handle.
3. Toggle the power switch to turn on the unit's lantern or spotlight.
Switch
Position
|
O
||

CHARGING THE BATTERY

Caution: Before charging the battery, make sure that all switches are set to "O", the off position
AC charging:
1. Insert the DC end of the AC/DC adapter into the charging jack.
2. Plug AC end into a wall outlet.
3. The charging indicator will light up. Charge levels will be indicated by red, yellow, and
green, with green indicating a full charge.
Vehicle DC charging:
1. Use the included DC/DC adaptor. Insert the small DC plug into the charging jack.
2. Plug the larger DC plug into the cigarette lighter socket in your vehicle.
3. The charging indicator will light up. Charge levels will be indicated by red, yellow, and
green, with green indicating a full charge.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
All manuals and user guides at all-guides.com
Spotlight
Low beam
Off
High beam
©2014 Wagan Corporation. All Rights Reserved.
Area Lantern/
Emergency Beacon
Area Lantern
Off
Emergency red LEDs
3

Publicité

Table des Matières
loading

Table des Matières