InnoCigs CUBOID LITE Manuel D'utilisation page 65

INNOCIGS CUBOID LITE – SELECTION & OPERATION OF THE MODES
All manuals and user guides at all-guides.com
Setting the TCR Mode (M1, M2, M3)
Press the Fire button and the Up button simultaneously while the device is switched off to enter the TCR menu:
1. Press the "Up" or "Down" button to switch between TCR M1, M2, and M3.
2. Press the Fire button to confirm the selected mode.
3. Press the "Up" or "Down" setting buttons to change the values corresponding to the coil of the atomizer head used.
4. Press and hold the fire button or wait about 10 seconds to confirm the settings.
TCR values for different materials
Material
Nickel
NiFe
Titan
SS (303, 304, 316, 317)
TCR Value Range
600-700
300-400
300-400
80-200
Note:
1. The TCR value in the table is multiplied by 10
current TCR.
2. The TCR value range is between 1 and 1000.
in the
5
63