How To Use - JB Systems amp 100.2 Mk2 Mode D'emploi

ENGLISH

HOW TO USE

STEREO OPERATION:
 Connect the audio signal to the inputs (11/12)
 Set the operation mode switch (14) to "stereo"
 Connect the matching speakers to the L+R Speakon
 Make sure the mains voltage matches 230Vac before connecting the
mains cable to the earthed wall socket.
 Set both input gains (3) to zero
 Make sure there's a music signal at the input
 Turn the amplifier on (2)
 Adjust the input gains (3) to the desired level
BRIDGE OPERATION:
 Connect the audio signal to the left input (11/12)
 Set the operation mode switch (14) to "bridge"
 Connect the matching speaker(s) to the Bridge Speakon
 Make sure the mains voltage matches 230Vac before connecting the
mains cable to the earthed wall socket
 Set both input gains (3) to zero
 Make sure there's a music signal at the left input
 Turn the amplifier on (2)
 Adjust the left input gain (3) to the desired level, leave the right channel
gain to zero.
MONO OPERATION:
 Connect the audio signal to the input of the left channel (11/12)
 Set the operation mode switch (14) to "mono"
 Connect the matching speakers to the L+R Speakon
 Make sure the mains voltage matches 230Vac before connecting the
mains cable to the earthed wall socket
 Set both input gains (3) to zero
 Make sure there's a music signal at the input
 Turn the amplifier on (2)
 Adjust the left input gain (3) to the desired level, leave the right channel
gain to zero.
SPECIFICATIONS
This unit is radio-interference suppressed. This appliance meets the requirements of the current European
and national guidelines. Conformity has been established and the relevant statements and documents have
been deposited by the manufacturer.
Power stereo 4Ω:
Power stereo 8Ω:
Power bridge 8Ω:
Peak limiters:
THD+N (stereo 8Ω):
Freq. Response (+/-1dB): 20-20.000Hz
Input sensitivity:
S/N ratio (A-weighted):
Slew Rate:
Weight:
Dimensions:
You can download the latest version of this user manual on our website:
JB SYSTEMS
®
AMP 100.2
2x 130Wrms
2x 70Wrms
1x 260Wrms
yes
<0,1%
0,775V~1,0V~1,44V
>100dB
>20V/ms
3,7kg
483x240x44 (19" / 1U)
Every information is subject to change without prior notice
®
outputs (17)
®
output (18)
®
outputs (17)
AMP 200.2
2x 250Wrms
2x 130Wrms
1x 500Wrms
yes
<0,1%
20-20.000Hz
0,775V~1,0V~1,44V
>100dB
>20V/ms
3,7kg
483x240x44 (19" / 1U)
5/34
OPERATION MANUAL
AMP 400.2
2x 450Wrms
2x 250Wrms
1x 900Wrms
yes
<0,1%
20-20.000Hz
0,775V~1,0V~1,44V
>100dB
>20V/ms
4kg
483x240x44 (19" / 1U)
www.jb-systems.eu
AMP Mk2-series