Installing The Radiator; Warnings; Positioning The Radiator - Acova Versus Notice D'utilisation

EN

2. INSTALLING THE RADIATOR

2.1 WARNINGS

IMPORTANT: Before performing any maintenance
work, put the dial in the
to cool completely and disconnect it from the mains.
The flexible cable supplied with your appliance is desi-
gned to be connected to the mains via a junction box that
must be placed behind the appliance, with no need for a
plug. In a kitchen or bathroom, the junction box must be
positioned at least 25 cm from the floor.
The appliance must be installed as described in this
document and in accordance with the applicable European
and French standards, including CEI 60364.7.701 and
NF C15-100, as well as the rules of good professional prac-
tice. For other countries (apart from France), the appliance
must be installed in accordance with standards in force and
with rules of good professional practice in the country of
use.
24
All manuals and user guides at all-guides.com
position, allow the appliance
Volume 2 Volume 1
0.60 m
Volume 0
IMPORTANT The example shown only concerns a
bathtub. For other bathroom fixtures, please consult
your installer.
IMPORTANT The system must be fitted with an
omnipolar circuit-breaker with a minimum contact
opening of 3mm.

2.2 POSITIONING THE RADIATOR

To gain the full benefit of your appliance and enjoy the
highest standards of comfort, we advise you to:
- install the radiator near places of high heat loss
(windows, doors, etc.) wherever possible;
- ensure that an area of at least 50 cm in front of the
appliance is clear of objects which might hinder air
circulation (furniture, armchairs, etc.);
- ensure that the bottom of the control unit is
positioned at least 15 cm from the floor;
- not place the heating appliance underneath a power
outlet;
- use mounting screws suitable for your wall.
IMPORTANT The radiator must not be exposed to
intensive or on-going ambient humidity (shower, swim-
ming pool, etc.).
40019728 12/2019
EN
25