Activation/Deactivation Of The „Grand Video Console Plus Ii; Settings Menu; Important; Operation Via Buttons At The „Grand Video Console Plus Ii - Conrad Grand Video Console Plus II Notice D'emploi

All manuals and user guides at all-guides.com
c) Activation/Deactivation of the „Grand Video Console Plus II"
Press the „PC/SEL" button on the top of the „Grand Video Console Plus II" briefly to activate or deactivate it.

If the device is switched off, the red LED on the top goes out, and the VGA input „PC IN" is passed through
to the VGA output „VGA OUT". The audio input „PC-Audio" is passed through to the output „AUDIO OUT".
This function makes it possible to continue to use the computer normally even if the „Grand Video Console
Plus II" is switched off.
All other functions are dedicated.
d) Settings Menu

Important!

If the VGA input is activated, the settings menu cannot be called! First switch to video or s-video input.
• Press the „MENU" button on the „Grand Video Console Plus II" of the IR remote control.
• The settings menu is displayed on the connected screen. You can make your changes either via the buttons on the
top of the „Grand Video Console Plus II" or via the included IR remote control.
Operation via Buttons at the „Grand Video Console Plus II"
• Select the desired main function with the „UP" and „DOWN" buttons (to leave the OSD again, press the „MENU"
button).
• Press the „ENTER" button to confirm your selection.
• Select the desired subfunction with the „UP" and „DOWN" buttons (to return to the main function selection, press the
„MENU" button).
• Press the „ENTER" button to confirm your selection.
• Adjust a setting (e.g. brightness, etc.) with the „UP" and „DOWN" buttons.
• To accept the settings and return to selection of the subfunctions, press the „MENU" button.

Operation via IR Remote Control

• Select the desired main function with the „" and „" buttons (to leave the OSD again, press the „Menu" button).
• Press the „ENTER" button to confirm your selection.
• Select the desired subfunction with the „" and „" buttons (to return to the main function selection, press the „Menu"
button).
• Press the „ENTER" button to confirm your selection.
• Adjust a setting (e.g. brightness, etc.) with the „" and „" buttons.
• To accept the settings and return to selection of the subfunctions, press the „Menu" button.
24