Adjusting Knob For The Video Input Level; Control For The Audio Input Level; Connection And Startup; Connections On The Back Panel - Conrad 751222 Notice D'emploi

6.5 Adjusting knob for the video input level

The video signal level is factory set to a standard value. Do not change this setting
unless absolutely necessary. Changing the video input level causes a change in
the brightness and contrast of the television. If you do need to change the level,
turn the rotary control to the appropriate position to set the level to your require-
ments.

6.6 Control for the audio input level

Ex works the audio input signal level is set to a standard level. Do not change this
setting, only if absolutely necessary. The response to a change in audio level is a
change in the sound level of the television.

7. Connection and startup

7.1 Connections on the back panel

AUDIO RF
INPUT
24