emerio HDH-126430 Mode D'emploi page 8

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
Operation
1. After washing your hair dry it with a towel.
2. Select your desired attachment.
3. Unwind the mains cable completely. Plug in your appliance.
4. Slide the switch to your desired air level:
Level 0 = off
Level 1 = warm air
Level 2 = hot air
Level
= cool air
5. After use, set the switch to position "0" and unplug the appliance.
Ionizing function – Reduction of static in hair
The appliance is also fitted with an ionizer which gives off negative ions with the air flow when switching on.
This process supports safe, gentle drying of hair and also promotes a better hair structure, maximizes hair
volume, provides for a silky finish and also reduces static in the hair.
This process is particularly gentle on stressed hair.
CLEANING AND MAINTANENCE
Ensure that the appliance is disconnected from the mains supply and cooled completely before cleaning.
Never immerse the appliance in water or any other liquids. Never rinse the appliance either. Always ensure
that the plug is kept dry.
Use a slightly damp cloth to clean the applaince. Dry carefully. Clean the air inlet and outlet openings
regularly for hair and dust. If necessary, a fine brush can be used.
The hairdryer hood, round brush and the nozzle can be cleaned with water and then wiped with a soft, dry
cloth. Dry them thoruoughly.
Do not use a wire brush or any abrasive items for cleaning. Do not use any acidic or abrasive detergents.
Keep the appliance in a dry place. Keep attachments separately when not needed.
Storage
Leave the appliance to cool down before putting it away!
Remove the attachment. Note: Let the hairdryer hood dry completely after use!
Stow the appliance and the attachments in the provided storage bag.
TECHNICAL DATA
Operating voltage: 220-240V ~ 50Hz
Power consumption: 400W
GUARANTEE AND CUSTOMER SERVICE
Before delivery our devices are subjected to rigorous quality control. If, despite all care, damage has occurred
during production or transportation, please return the device to your dealer. In addition to statutory legal
rights, the purchaser has an option to claim under the terms of the following guarantee:
For the purchased device we provide 2 years guarantee, commencing from the day of sale. If you have a
defective product, you can directly go back to the point of purchase.
Defects which arise due to improper handling of the device and malfunctions due to interventions and repairs
by third parties or the fitting of non-original parts are not covered by this guarantee. Always keep your receipt,
without the receipt you can't claim any form of warranty. Damage caused by not following the instruction
- 7 -

Publicité

Table des Matières
loading

Table des Matières