Print Quality Problems - Epson XP-410 Guide Rapide

Print Quality Problems

If you have any problems with the copy or print quality, try these solutions:
■
Make sure the document is placed flat against the scanner glass and your Epson
printer is not tilted or placed on an uneven surface.
■
Load the paper printable side up (usually the whiter, brighter, or glossy side).
■
Make sure your paper isn't damp or curled.
■
Use a support sheet with special paper or load your paper one sheet at a time. Remove
sheets from the output tray so not too many collect at a time.
■
Make sure the type of paper you loaded matches the paper size and paper type settings
on the control panel or in your printer software (see page 10).
■
For the best print quality, use Epson special paper and genuine Epson ink cartridges
(see page 14).
■
If you notice light or dark bands across your printouts or they are too faint, you may
need to clean the print head (see page 13). This unclogs the nozzles so they can deliver
ink properly. Run a nozzle check as described on page 13 to see if the print head needs
cleaning.
■
Clean the print head as described on page 13.
■
If you notice jagged vertical lines, you may need to align the print head. See your
online User's Guide for instructions.
■
The ink cartridges may be low on ink. Check your cartridge status (see page 14) and
replace cartridges, if necessary (see page 14).
■
If a dotted line appears in the image, clean the scanner glass with a soft, dry, lint-free
cloth (paper towels are not recommended and may permanently scratch the surface),
or use a small amount of glass cleaner on a soft cloth, if necessary. Do not spray glass
cleaner directly on the glass.
20
Problems and Solutions