Epson XP-330 Guide Rapide

XP-330/XP-430/XP-434 Small-in-One
Start Here
1
Unpack
2
Turn on and configure
1
2
Caution:
Do not connect to your computer yet.
3
Install ink cartridges
4
Load paper
3
1
2
2
Caution: Do not lower the control
panel without first squeezing the
release bar underneath or you may
damage the product.
1
4
1
Check the current paper settings on the
control panel.
To use these settings, press OK. If you
want to change the settings, press
to select Change, then press OK. Select
paper size, press OK, select paper type,
then press OK to confirm settings.
Printer
®
Read these instructions before using your product.
Note for Spanish speakers/Nota para hispanohablantes: Para obtener instrucciones de
configuración en español, consulte la Guía de instalación en www.epson.com/support/xp330sp,
www.epson.com/support/xp430sp o www.epson.com/support/xp434sp (requiere una
conexión a Internet).
Note: Do not open ink cartridge packages until
you are ready to install the ink. Cartridges are
vacuum packed to maintain reliability.
To select English as your language, press OK.
1
If you want to change the language, press
it, then press OK.
Note: You can change the language later using the product's
control panel. For more information, see the online User's Guide.
4 minutes
2
2
or
or to select
Press to prime the ink delivery system. Priming takes
about 4 minutes.
Note:
• The printer is designed for use with Epson
not third-party cartridges or ink.
• The cartridges included with the printer are designed for
printer setup and not for resale. After some ink is used for
priming, the rest is available for printing.
Caution: Don't turn off the printer while it is priming or you'll
waste ink.
8½ × 11 inch
(216 × 279 mm)
4 × 6 inch
(102 × 152 mm)
English
® cartridges only,