Infrared Remote Control - Auping AVS Mode D'emploi

All manuals and user guides at all-guides.com

4.4 Infrared remote control*

Model 455
Model 488
On delivery, corresponding handset and
control units are set to the same
channel. In order to prevent that the IR
controls of two beds in the same room
will interfere
operation, each should be switched
to its own IR channel. Red slider
_04DU3_3903 - BW.pdf - pag.21
Model 477
with one another's
LET OP !!! Lage resolutie!
switches can be found in the battery
compartment of the handset and on the
control unit. Both switches should be
set either to the left or right (see fig. 1).
left
right
If both beds are adjusted simul -
taneously using the infrared remote
control or, at the same time, another
remotely controlled is used, the infrared
frequencies may interfere with one
another. In such cases, please operate
the beds and/or appliances separately.
* If applicable.
fig. 1
GB21
January 23, 2009