All manuals and user guides at all-guides.com
EN
A lever for engaging and disengaging the power
take-off for operating front-mounted accessories.
Two positions:
1. Lever in forward position – power take-
off disengaged.
2. Lever in backward position - power
take-off engaged.
2.4.9 Hour meter (2:P)
Indicates the number of working hours. Only
works when the engine is running.
2.4.10Clutch release lever
A lever for disengaging the variable transmission.
2WD is equipped with a lever, connected to the
rear axle. See (5:R).
The lever enables the machine to be moved by
hand without the help of the engine.
The disengagement lever must never be
between the outer and inner positions.
This overheats and damages the trans-
mission.
Two positions:
1. Lever in the inner position –
transmission engaged for normal
operation.
2. Lever in the outer position –
transmission disengaged. The
machine can be moved by hand.
The machine may not be towed over long distances
or at high speeds. The transmission could be dam-
aged.
2.4.11 Seat (1:S)
The seat can be folded and adjusted front-
rear. The seat can be adjusted as follows:
1. Move the control lever (1:T) upwards.
2. Set the seat to the desired position.
3. Release the control lever (1:S) to lock
the seat.
The seat is equipped with a safety switch that is
connected to the machine's safety system. This
means that certain dangerous activities are not pos-
sible when there is nobody sitting on the seat. Also
see 4.4.2.
2.4.12 Engine casing (6:U)
In order to access the fuel cock, battery
and engine, the machine has an engine
casing that can be opened. The engine cas-
ing is locked with a rubber strap.
The engine casing is opened as follows:
1. Undo the rubber strap (6:V) at the front edge of
the casing.
44
ENGLISH
2. Carefully lift the engine casing back.
Close in the reverse order.
The machine may not be operated un-
less the engine casing is closed and
locked. Risk of burns and crushing in-
juries.
3 AREAS OF USE
The machine may only be used for the following
tasks using the genuine STIGA accessories stated.
Work
Accessories, STIGA genuine
Mowing
Using mowing decks:
95 C och 105 C, s and with flail
mower.
Sweeping
Using brush unit or collector
brush unit. The use of a dust
guard is recommended with the
first option.
Snow clearance
Using snow blade or snow
thrower Snow chains and frame
weights are recommended.
Grass clipping and
Using towed collector 30" or
leaf collection
42". Pro Cart.
Grass and leaf
Using dump cart Pro or Combi.
transport
Weeding on gravel
Using front-mounted hoe.
paths
Lawn edge trim-
Using edge trimmer.
ming
Moss scarification Using moss scarifier.
The maximum vertical load on the towing hitch
must not exceed 100 N.
The maximum over-run load on the towing hitch
from towed accessories must not exceed 500 N.
NOTE! Before using a trailer – contact your insur-
ance company.
NOTE! This machine is not intended to be driven
on public roads.
4 STARTING AND OPERATION
The machine may not be operated un-
less the engine casing is closed and
locked. Risk of burns and crushing in-
juries.
4.1 Filling with petrol
Always use lead-free petrol. You must never use 2-
stroke petrol mixed with oil.
The tank holds 12 litres. The level can easily be
read through the transparent tank.