Cafe CGU366 Instructions D'installation page 5

PRODUCT DIMENSIONS AND CLEARANCES FOR 36" MODELS
WARNING
Installations
to combustibles. A custom hood
combustible surfaces must have
installation instructions for specific
hood clearances.
The surface of the entire back
or other stone.
CAUTION
To prevent
drafts from affecting burner
floor under appliance and behind
** As defined in the National Fuel Gas
combustible materials are not part of the
certified by CSA. Clearances less than
ADDITIONAL CLEARANCES:
Working areas adjacent to
countertop and the bottom of the
back edge of countertop and 3 in.
minimum from cutout to side edges
31-2000816 Rev. 2
Design Information
Front of
Bullnose
Height
to Combustibles
Back
for overhang mentioned in
footnote on page 6)
(see page 6 for details)
Island Cutout
Universal Utility Locations
Locate gas
inlet on back
Each Side
for details)
(accounts
Adjacent Wall
for details)
the rangetop to slide
material above the
cooking surface **
Combustibles
Clearance
5