Design Information - Cafe CGU366 Instructions D'installation

PRODUCT DIMENSIONS AND CLEARANCES FOR 48" MODELS
WARNING
Installations
to combustibles. A custom hood
combustible surfaces must have
installation instructions for specific
hood clearances.
The surface of the entire back
or other stone.
CAUTION
To prevent
drafts from affecting burner
floor under appliance and behind
** As defined in the National Fuel Gas
combustible materials are not part of the
certified by CSA. Clearances less than
ADDITIONAL CLEARANCES:
Working areas adjacent to
countertop and the bottom of the
back edge of countertop and 3 in.
minimum from cutout to side edges
4

Design Information

Front of
Bullnose
to Combustibles
Back
(accounts
for overhang mentioned in
footnote on page 6)
(see page 6 for details)
Island Cutout
Universal Utility Locations
Locate gas
inlet on back
Adjacent Wall
Each Side
(see page 6 for
details)
material above the
cooking surface **
(see page 6
for details)
the rangetop to slide
Combustibles
Clearance
31-2000816 Rev. 2