Resistance Measurements - Klein Tools CL380 Manuel D'utilisation

RESISTANCE MEASUREMENTS

1. Insert RED test lead into VΩ jack
COM jack
4
Continuity/Resistance/Capacitance/Diode-Test
NOTE: The meter defaults to Continuity testing in this mode. Press
the "SEL/NCV" button
appears on the display.
2. Remove power from circuit.
3. Measure resistance by connecting test leads to circuit. The
meter will auto-range to display the measurement in the most
appropriate range.
Black lead
NOTE: When in a Resistance setting and the test leads are open
(not connected across a resistor), or when a failed resistor is under
test, the display will indicate "OL" This is normal.
DO NOT attempt to measure resistance on a live circuit.
OPERATING INSTRUCTIONS
, and rotate function selector switch
repeatedly until the resistance icon
12
Red lead
, and BLACK test lead into
5
to the
2
setting.
13