Samsung 8+ Serie Mode D'emploi page 12

5
Terms of Service Agreement
6
Auto Tuning (1): Selecting how
you watch your TV
7
Auto Tuning (2):
Selecting a search options and
Region Selection (Depending
on the country)
8
Clock: Setting the Clock Mode
9
Time Zone
(Depending on the country):
Setting the your Time Zone
10
Voice and motion control:
Setting the Voice and Gesture
Control function.
11
Setup Complete
If You Want to Reset This Feature...
Menu → System →Setup
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0". If you want to change the PIN number, use
the Change PIN function.
You should do Setup (Menu → System) again at home although you did in shop.
✎ If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to "0-0-0-0":
→ 8 → 2 → 4 →
MUTE POWER
When the Network Settings is completed, The Terms of Service Agreement screen appears.
✎
The screen can take a few seconds to appear.
The General Disclaimer screen appears. Select Agree. The Privacy policy screen appears. Select
Agree.
✎
To use the Smart Hub, you should select Agree from the Terms of Service Agreement.
Let's find and store channels on your TV. Do you need to search for channels?
• Yes, I need to.: All the channels available will be found and stored on your TV.
• No, I don't need to.: My set-top box provides all the channels that are available, so I don't
need to search for channels.
Select the channel source to memorise. When setting the aerial source to Cable, a step appears
allowing you to assign numerical values (channel frequencies) to the channels. For more information,
refer to Auto Tuning (Channel Menu → Memorizing Channels) in the e-Manual.
✎
Select Stop at any time to interrupt the memorization process.
✎
Some channel may not be transmitted to this television. It depends on Broadcasting signal
gain or specification.
• Auto: Set the current time automatically.
• Manual: Allows you to manually set the current date and time.
This step is only available when the clock mode is set to Auto.
• Auto: Set the time zone automatically.
• Manual: Set the time zone manually.
✎
If you selected Manual, you can select whether to turn DST (Daylight Savings Time) On or
Off. (Depending on the country)
✎ You can turn the Voice and motion control function On or Off. Select Off or On, and then
select Next. For more detailed information, refer to "SMART Interaction" (p.14)
Select Close to finish.
✎
The completed settings are displayed.
(on).
English - 12