Custom Panels - Thermador KBULT3651A Instructions D'installation

Pour réfrigérateurs encastrés
Masquer les pouces Voir aussi pour KBULT3651A:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

If you plan to install custom wood panels, you will need to create
the panels yourself or consult a qualified cabinetmaker or
carpenter. See dimension drawings for panel specifications.
IMPORTANT: Panels weighing more than recommended may
cause damage to your refrigerator.
NOTE: Dimensions shown have a (±) ¹⁄₁₆" (1.5 mm) tolerance.
Panels that are more than ¹⁄₄" (6.35 mm) thick must be routed. If
panels are less than ¹⁄₄" (6.35 mm) thick, install a filler panel
between the door and the decorative panel.
Top Grille Panel
The top panel should not weigh more than 10 lbs (4.5 kg) total
weight.
¹⁄₂
34
"
(87.63 cm)
Refrigerator and Freezer Panels
The freezer panel should not weigh more than 30 lbs (13.5 kg)
total weight. The refrigerator panel should not weigh more than
60 lbs (27 kg) total weight.
34
1
/
(87 cm)
34
1
/
(87 cm)
All manuals and user guides at all-guides.com
C ustom Pan e ls
¹⁄₄
7
"
(18.4 cm)
"
4
49"
(124.5 cm)
"
4
20
1
/
"
8
(51.1 cm)
Top Grille Panel – Routing Requirements
Top and bottom edges of the top panel should be edge routed
¹⁄₂" (1.3 cm) and ³⁄₈" (9.5 mm), respectively. Both ends should be
edge-routed ⁷⁄₈" (2.2 cm) as shown.
1
/
"
4
(6.35 mm)
max.
Top
Grille
7
/
"
8
(2.2 cm)
NOTE: When creating a panel with face detail, the offsets will be
hidden and must be accounted for in order to center the detail in
the top grille.
1
/
"
2
(1.3 cm)
min.
Center face
detail between
offsets
3
/
"
8
(9.5 mm)
min.
Door Panel – Routing Requirements
If an extended handle kit is used, then routing the handle side of
the door and drawer panels is not required. See "Handle and
Door Clearances for Custom Panel Series" for more information
on ordering extended handles.
If the standard handle is used, route the entire handle side 3¹⁄₄"
(8.25 cm) to allow for finger clearance. Then route the other side
1" (2.54 cm).
Standard Handle – Top View
3
1
/
"
4
(8.25 cm)
min.
1
/
" (6.35 mm) max.
4
2" (5 cm)
min.
1
/
4
(6.35 mm)
max.
Top
Grille
7
/
"
8
(2.2 cm)
1
/
"
4
(6.35 mm) max
1
/
"
4
(6.35 mm) max
Hinge Side
Door
Door
Panel
Panel
(2.54 cm)
"
1"
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kburt3651aKbult3661aKburt3661aKbult3671aKburt3671a

Table des Matières