Twin-Star International 33WM630 Manuel D'instruction page 5

MANTEL/TOP
G
ASSEMBLY
ELECTRIC
FIREPLACE INSERT
E-4
All manuals and user guides at all-guides.com
M
L
COMPLETED
Completed
Unit
INSTALL
INSERT
FROM
BACK
11. Locate Mantel/Top (G) and lay
finished side up on top of completed
assembly. From the inside, attach
the Mantel using Bolt (L) and Washer
(M) through the pre-drilled holes in
the mounting blocks.
HAND TIGHTEN ONLY.
12. Using Phillips head screwdriver
tighten all Bolts alternating top and
bottom, left and right.
13. Remove the two mounting brackets
attached to the back of the Left and
Right Front panels. Set aside with the
wood screws.
Please read All "Electric Fireplace
Insert" instructions prior to installing
Electric Insert in your completed
Fireplace Mantel. Install the insert in
your Fireplace close to its final
position. Move your completed unit
only short distances. Move completed
Unit with great care. It takes two
people to move completed unit into
its position.
14. Lift insert carefully into the back
of the unit and center in the insert
opening. Do not drag insert across
Base/Hearth as it may scratch your
unit.
15. Install the mounting brackets to
hold insert flush against the inside of
the mantel.
Twin-Star International, Inc.
Delray Beach, FL 33483
In English: 1-866-661-1218
In French: 1-866-374-9203
In Spanish: 1-866-661-1218
Model# 33WM630
Made in China
Printed in China
© 2006, Twin-Star International, Inc.