boso medicus PC 2 Mode D'emploi page 71

Data transfer and assessment
Start the boso profile-manager via the icon "blood pres-
sure measurement"
Choose the part "self monitoring" via a mouse click on
the left part of the monitor
Connect the boso-medicus PC 2 with the enclosed PC-
connection cable with the USB port of your PC
Through <Setup...><Interface> you choose the USB-
connection and confirm with <OK>
A new patient is created via the icon <new> in the regi-
ster "Patient" (mandatory are the patientnumber and
the name)
Choose the register "Edit" and activate the icon <trans-
fer measurements...>
Press the START/STOP button on your boso-medicus
PC 2 within 6 seconds
After successful data transfer you are asked to name
the year when the last measurment took place. Please
do this and confirm with <OK>
Disconnect the PC-connection cable from the boso-me-
dicus PC 2.
After successful data transfer delete the memory by
pressing the SET-button until
A comprehensive instruction manual for the boso
profile-manager is to be found on the enclosed CD.
Attention:
No blood pressure measurement is possible during the
data transfer mode.
M flashes in the display.
71