Table Des Matières; Safety - Toro Flex-Force Power System Mode D'emploi

Contents
Safety ....................................................................... 3
Personal Protective Equipment .......................... 6
Safety and Instructional Decals .......................... 7
Setup ........................................................................ 9
Filling the Chain Saw with Bar and Chain
Oil ................................................................... 9
Product Overview ..................................................... 9
Specifications .................................................. 10
Attachments/Accessories ................................. 10
Operation ................................................................ 10
Before Using the Chain Saw ............................. 10
Starting the Chain Saw ......................................11
Shutting Off the Chain Saw ................................11
Cutting with the Chain Saw ............................... 12
Pruning a Tree .................................................. 13
Felling a Tree.................................................... 13
Limbing a Fallen Tree ....................................... 15
Bucking a Log................................................... 16
Installing the Battery Pack ................................ 17
Removing the Battery Pack .............................. 17
Charging the Battery Pack ................................ 18
Maintenance ........................................................... 19
Recommended Maintenance Schedule(s) ........... 19
Checking the Oil Level and Adding Bar and
Chain Oil ....................................................... 19
Checking the Chain Brake ................................ 20
Checking the Flow of Bar and Chain
Oil ................................................................. 20
Adjusting the Chain Tension ............................. 21
Servicing the Guide Bar, Chain, and Drive
Sprocket........................................................ 22
Installing the Guide Bar and Chain .................... 23
Sharpening the Chain ....................................... 23
Service ............................................................. 23
Storage ................................................................... 24
Preparing the Battery Pack for
Recycling ...................................................... 24
Troubleshooting ...................................................... 25

Safety

WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future
reference.
The term "power tool" in all the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
IMPORTANT SAFETY
INSTRUCTIONS
I. Work area safety
1. Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gasses, or dust. Power
tools create sparks, which may ignite the dust
or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
II. Personal safety
1. Stay alert, watch what you are doing, and
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the influence of drugs, alcohol,
or medication. A moment of inattention while
operating power tools could result in serious
personal injury.
2. Use personal protective equipment. Always
wear eye protection. Protective equipment
such as a dust mask, non-skid safety shoes,
hard hat, or hearing protection used for
appropriate conditions reduces personal injuries.
3. Prevent unintentional starting. Ensure
the switch is in the O
connecting to power source and/or battery
pack, picking up or carrying the tool. Carrying
power tools with your finger on the switch or
energizing power tools that have the switch on
invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
3
-position before
FF