Olivetti d-COPIA3002MF Manuel D'utilisation page 544

DICHIARAZIONE
MANUFACTURER'S CE DECLARATION of CONFORMITY according to ISO/IEC 17050
OLIVETTI S.p.A
Dichiara sotto la sua responsabilita' che i prodotti:
Declares under its sole responsibility that the products:
Categoria generale:
Equipment category:
Tipo di apparecchiatura:
Product type:
Nome / model:
Opzioni / options:
sono CONFORMI alla Direttiva 1999/5/CE del 9 marzo 1999
are in compliance with directive 99/5/EC dated 9
e soddisfano i requisiti essenziali di Compatibilità Elettromagnetica, Consumo Energetico e Sicurezza previsti
dalle Direttive:
and fulfill the essential requirements of Electromagnetic Compatibility, Electrical Power Consumption and
Electrical Safety as prescribed by the Directives:
2004/108/CE del 15 Dicembre 2004; (EMC)
th
2004/108/EC dated 15 December 2004;
2009/125/CE del 21 Ottobre 2009; (ErP)
st
2009/125/EC dated 21 October 2009;
2006/95/CE del 12 Dicembre 2006; (LVD)
th
2006/95/EC dated 12 December 2006;
in quanto progettati e costruiti in conformità alle seguenti Norme Armonizzate:
since designed and manufactured in compliance with the following European Harmonized Standards:
EN 55022:2010 (Limits and methods of measurements of radio interference characteristics of Information
Technology Equipment) / Class B;
EN 61000-3-2:2006+ A1:2009+ A2:2009 (Electromagnetic Compatibility (EMC) - Part 3: Limits - Section 2:
Limits for harmonic current emissions (equipment input current  16 A per phase)
EN 61000-3-3:2008 (Electromagnetic Compatibility (EMC) - Part 3: Limits - Section 3: Limitation of voltage
fluctuations and flicker in low voltage supply systems for equipment with rated current up to and including
16A);
EN 55024:2010 (Electromagnetic Compatibility – Information technology equipment – Immunity characteristics
– Limits and methods of measurement);
EN 60950-1:2006+ A11:2009+ A1:2010+ A12:2011 (Safety of Information Technology Equipment, including
electrical business equipment.)
EN 60825-1:2007 (Radiation Safety of laser products, equipment classification, requirements and user's guide).
ETSI TBR 21/1998 - Requirements for pan-European approval for connection to the analogue Public Switched
Telephone Networks (PSTN) of TE (excluding TE supporting the voice telephony service) in which network
addressing, if provided, is by means of Dual Tone Multi Frequency (DTMF) signaling.
EN 302 291-1 V1.1.1
EN 302 291-2 V1.1.1
EN 300 328 V1.7.1
EN 62311: 2008
EN 62301:2005 (Household electrical appliances – Measurement of standby power)
La conformità ai suddetti requisiti essenziali viene attestata mediante l'apposizione della Marcatura CE sul
prodotto.
Compliance with the above mentioned essential requirements is shown by affixing the CE marking on the product.
Ivrea, 09 Settembre 2013
th
Ivrea, 09 September 2013
Note: 1) La Marcatura CE è stata apposta nel 2013
Notes: 1) CE Marking has been affixed in 2013
2) Il Sistema della Qualità è conforme alle norme serie UNI EN ISO 9000.
2) The Quality System is in compliance with the UNI EN ISO 9000 series of Standards
Olivetti S.p.A. - Via Jervis, 77 - 10015 Ivrea (To) - Italy - Tel +39 0125 7751 - Cap. Soc. € 13.200.000 R.E.A. 547040 - Cod. Fisc./P.IVA e iscriz. al Reg. Imp. Di Torino 02298700010
Società con unico azionista, Gruppo Telecom Italia - Direzione e coordinamento di Telecom Italia S.p.A.
CE
DI CONFORMITA' del COSTRUTTORE secondo ISO/IEC 17050
Via Jervis, 77 - IVREA (TO) - ITALY
Apparecchiature per la Tecnologia dell'Informazione
Information Technology Equipment
Stampante Multifunzionale
Multifunctional Printer
d-Copia 3002MF, d-Copia 3502MF
PF-791, Fax System W, IB-50, DP-770, DP-772, DP-773, PH-7,
PF-810, DF-770, MT-730, DF-791, AK-740, IB-51,
Printed Document Guard (B)
th
march 1999
Walter Fontani
Quality Director
Olivetti S.p.A.
N ° 13-113