Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Indications
TEL
Telephone muting
SCROLL*
3
Scroll
WOOFER
Subwoofer cutoff
frequency
HPF
High pass filter
TAG DISP
Tag display
REAR SPK*
4
Rear speaker output
AMP GAIN
Amplifier gain control
*
3
Some characters or symbols will not be shown (and will be blanked) on the display.
*
4
Displayed only when Dual Zone is activated (see page 35).
Selectable settings, [reference page]
MUTING 1/MUTING 2: Select either one which mutes the playback
sounds while using a cellular phone.
OFF
: [Initial]; Cancels.
ONCE
: [Initial]; Scrolls the track information once.
AUTO
: Repeats scrolling (5-second intervals in between).
OFF
: Cancels.
• Even if "SCROLL" is set to "OFF," you can scroll the display by
pressing D DISP for more than one second.
LOW
: Frequencies lower than 80 Hz are sent to the
subwoofer.
MID
: [Initial]; Frequencies lower than 120 Hz are sent to
the subwoofer.
HIGH
: Frequencies lower than 160 Hz are sent to the
subwoofer.
HPF ON
: The cut-off frequency is chosen automatically
according to the WOOFER setting (LOW/MID/
HIGH) so that you can enjoy the bass sound purely
from the subwoofer if it is connected.
HPF OFF
: [Initial]; Cancels.
TAG ON
: [Initial]; Shows the tag while playing MP3/WMA
tracks, [45].
TAG OFF
: Cancels.
ON
: [Initial]; Select this to turn on the rear speaker output.
OFF
: Cancels.
You can change the maximum volume level of this unit.
LOW PWR
: VOL 00 – VOL 30 (Select this if the maximum power
of the speaker is less than 50 W to prevent the speaker
from being damaged.)
HIGH PWR : [Initial]; VOL 00 – VOL 50
41
Publicité
Table des Matières
