General Settings - Psm - JVC KD-DV5202 Manuel D'instructions

General settings — PSM
Basic procedure
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
2
Select a PSM item.
Ex.: When you select "DIMMER"
Indications
DEMO
Display demonstration
CLOCK H
Hour adjustment
CLOCK M
Minute adjustment
24H/12H
Time display mode
CLK ADJ
Clock adjustment
3
4
5
Selectable settings, [reference page]
DEMO ON : [Initial]; Display demonstration will be activated
automatically if no operation is done for about
20 seconds, [11].
DEMO OFF : Cancels.
0 – 23 (1 – 12), [11]
[Initial: 0 (0:00)]
00 – 59, [11]
[Initial: 00 (0:00)]
12H O 24H, [11]
[Initial: 24H]
AUTO : [Initial]; The built-in clock is automatically
adjusted using the CT (clock time) data in the
RDS signal.
OFF : Cancels.
Adjust the PSM item selected.
2
Repeat steps and
other PSM items if necessary.
Finish the procedure.
Continued on the next page
3
to adjust the
39