Product Information; Manufacturer´s Data; Machine Identification; Technical Data - Mafell LO 50 E Mode D'emploi

All manuals and user guides at all-guides.com
You will find the following warnings and symbols in these operating instructions:
This symbol indicates where you will find notes for your safety. If disregarded, this may result in
very serious injuries.
This symbol indicates a potentially hazardous situation. If it is disregarded, the product or objects
in its vicinity may be damaged.
This symbol indicates tips for the user and other useful information.
1

Product information

for machines with Art.-Nr. 913 302, 913 330, 913 331 or 913 332
1.1 Manufacturer´s data
MAFELL AG
P. O. Box 1180, D-78720 Oberndorf/Neckar
Phone +49 7423 812-0, Fax +49 7423 812-218
1.2

Machine identification

All data required for identification of the machine are stated on the rating plate which is attached to the motor
casing.
Protection class II
CE-mark to declare conformity with the essential health and safety requirements according to
Annex I of the Machinery Directive
Only for EU countries
Do not dispose of electric tools together with household waste material!
In observance of European Directive 2002/96/EC on waste electrical and electronic equipment
and its implementation in accordance with national law, electric tools that have reached the
end of their life must be collected separately and returned to an environmentally compatible
recycling facility.
1.3

Technical data

Cutting depth adjustment with micro adjustment
Revolving depth control turret
Collet chuck:
with collets
Speed – no load
Speed stabilized electronically under load
Diameter of connection at chip collector
Weight without mains cable
0 – 50 mm (0 - 1 31/32 in.)
∅
6 – 8 mm (15/64–5/16 in.)
10000 – 22000 rpm or 9500 – 24000 rpm
-12-
English
3 - stages
35 mm (1 3/8 in.)
2.7 kg (6 lbs)