Removing and replacing the warming drawer
(Model NX58*565***)
To remove and clean the warming drawer
Left drawer
locking clip
Right drawer
locking clip
NX58H5 Series_AA_DG68-00526A-14_EN+MES+CFR_WEB.indb 69
1. Pull out the drawer until it stops.
2. Locate the locking clips near the back
of each full-extension roller guide rail.
Using two hands, push down on the
left clip and lift up on the right clip to
release the clips. Pull the drawer the
rest of the way out.
3. Clean the drawer in warm, soapy water.
Rinse and dry thoroughly.
To replace the warming drawer
1. Position the ends of the full-extension
Right roller
guide rail
2. Push in the drawer to close it and snap
roller guide rails in the side rails in the
drawer opening.
the locking clips into place.
English 69
2020-06-23 오전 9:09:53