Samsung NX58 565 Serie Manuel D'utilisation page 78

Masquer les pouces Voir aussi pour NX58 565 Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Troubleshooting
PROBLEM
POSSIBLE CAUSE
This is the first time the oven
Excessive
has been cleaned.
smoking
during a self-
cleaning cycle.
This is normal.
Oven door will
not open after
a self-cleaning
cycle.
78 English
NX58H5 Series_AA_DG68-00526A-14_EN+MES+CFR_WEB.indb 78
SOLUTION
This is normal. The oven will
Oven not clean
always smoke more the first
after a self-
time it is cleaned.
cleaning cycle.
Wipe up all excessive soiling
before starting the self-
cleaning cycle.
If smoke persists, press the
OFF/CLEAR pad. Open the
windows to clear the smoke
from the room. After the oven
has cooled and unlocked, wipe
up excessive soil and reset
the oven for self-cleaning.
The oven door will stay
Steam or
locked until the oven
smoke coming
temperature drops below
from under the
350 °F.
control panel.
Burning or oily
odor emitting
from the vent.
PROBLEM
POSSIBLE CAUSE
A fine dust or ash is normal.
This is normal.
This is normal for a new oven
and will disappear within 1/2
hour of the first bake cycle.
SOLUTION
This can be wiped clean with
a damp cloth.
Set the self-cleaning cycle for
a longer cleaning time. The
cycle was not long enough to
burn off the dirt buildup.
Extremely dirty ovens require
hand-cleaning of excessive
spillovers and food buildup
before starting a self-cleaning
cycle. Multiple self-cleaning
cycles may be necessary to
completely clean the oven.
The oven vent is located
there. More steam is visible
when using the convection
functions or when baking or
roasting multiple items at the
same time.
To speed the process, set
a self-cleaning cycle for a
minimum of 3 hours. (See
pages 72 and 73.)
2020-06-23 오전 9:09:55

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Nx58 560 serieNx58 751 serie

Table des Matières