Lighting; Light Replacement - AYA AHV60WLED Manuel D'installation

All manuals and user guides at all-guides.com

LIGHTING

LIGHT REPLACEMENT

1. Switch off the extractor hood and isolate the extractor hood by
pulling out the mains plug and switching off the fuse
2. Remove the grease filter.
3. Remove the light by levering its fitting from the hood body
(this may require pressure or force to be applied).
4. Disconnect the connector of the light.
5. Replace the light with a new one of the same type,making
sure that you connect the light with the light cable correctly.
6. Reconnect the power by inserting the mains plug or by
switching on the fuse.
Max
power
LED 1.5W
modules,
separete
ballast
Information
Clean ventilation fans frequently. Grease should not be allowed to
accumulate on fan or filter.
Voltage
220-
240V~
Square/Diameter:
33.2x120mm
EN-16
Lamp
Picture
Cap
ILCOS
D code
DSH-1.5
-S-33.3/
120