Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
INSTALLATION
WALL DRILLING AND BRACKET FIXING
Please read the instructions carefully.
Unpack the canopy and check that all functions are working.
Ensure that the voltage (V) and the frequency (Hz) indicated on
the serial plate match the voltage and frequency at the
installation site.
Check that the area behind the installation surface to be drilled
is clear of any electrical cables or pipes, etc.
The stainless steel and glass surfaces of the canopy are very
easily damaged during installation if grazed or knocked by tools.
Please take care to protect the surfaces during installation.
Protect the cooktop surface below with cardboard, or the like, to
prevent damage occurring whilst the wall canopy is being
installed above.
The manufacturer shall not be liable for failure to observe all
safety regulations in force for the correct and normal operation
of electrical parts.
Choose a venting mode:
Exaction-air mode
Recirculation mode
EN-11
Publicité
Chapitres
Dépannage
