Epson ELPMB29 Guide De L'utilisateur page 11

Warning
❏
Tighten all adjuster bolts firmly after installation. Otherwise, this product or the projector may fall or
collapse, and cause personal injury or an accident.
❏
Do not attempt to tighten adjuster bolts on obstacles.
e
Install the Touch Unit attachment plate (only for models that include
a Touch Unit)
(1) Mount the Touch Unit attachment plate on the Touch Unit using M3 x 8 mm hexagon
socket head cap bolts (x2) .
(2) Mount the Touch Unit attachment plate on the base frame using M3 x 8 mm hexagon
socket head cap bolts (x2) .
Mount so that the Touch Unit attachment
plate is flush with the side of the U-shaped
arm.
11