Installation Details - CGS Merlin 'S' Range Installation, Fonctionnement Et Entretien

Installation, Operation & Maintenance Manual Merlin Detector-TFT

Installation Details

Please pass this manual to the system owner / user.
Date of Installation:
Installation Location:
Organisation:
Stamp/Signature of the installer:
We recommend all Merlin gas detection equipment be commissioned by competent/trained engineers to ensure correct installation
and operation. The Merlin range of gas detectors are calibrated when manufactured, however, we strongly recommend the
detectors response and alarm signals are tested and validated once installed. This will ensure the equipment performs as intended
and is free from any unforeseen damage caused by transit/installation.
Every effort is made to ensure the accuracy of this document; however, CGS can assume no responsibility for any errors or
omissions in this document or their consequences. CGS would greatly appreciate being informed of any errors or omissions that
may be found in the content of this document. For information not covered in this document, or if there is a requirement to send
comments/corrections, please contact CGS using the contact details given below.
Find out more
Canadian Gas Safety
www.canadiangassafety.com
Head office:
150 King Street West, Suite 200, Toronto, ON M5H 1J9
Tel: 647-577-1500
Email: info@canadiangassafety.com
Canadian Gas Safety is the owner of this document and reserves all rights of modification without prior notice.
IOM Iss: 4 11-21 16