Safety Instructions; Work Area Safety; Electrical Safety - Hilti SF 14-A Mode D'emploi

All manuals and user guides at all-guides.com
Noise and vibration information (measured in accordance
with EN 60745):
Typical A-weighted sound 86 dB (A)
power level for the SF 14-A
Typical A-weighted sound 102 dB (A)
power level for the SFH 14-A
Typical A-weighted emission 75 dB (A)
sound pressure level for the
SF 14-A
Typical A-weighted emission 91 dB (A)
sound pressure level for the
SFH 14-A.
Uncertainty for the given sound 3 dB (A)
level
Triaxial vibration values (vibra- Measured in accordance with
tion vector sum) EN 60745­2­2
Screwdriving without impact < 2.5 m/s²
action, a
h
Uncertainty (K) 1.5 m/s²
Triaxial vibration values (vibra- measured in accordance with
tion vector sum) EN 60745­2­1
Hammer drilling in concrete, 13.5 m/s²
a
h,ID
Drilling in metal, a < 2.5 m/s²
h,D
Uncertainty (K) for triaxial vibra- 1.5 m/s²
tion measurements
Battery B 14/3.3 Li­Ion
Rated voltage 14.4 V
Capacity 3.3 Ah
Energy content 47.52 Wh
Weight 0.60 kg
Temperature monitoring Yes
Type of cell Li­Ion
No. of cells 8

5 Safety instructions

NOTE
The safety rules in section 5.1 contain all general safety rules for
electric tools which, in accordance with the applicable standards,
must be listed in the operating instructions. Accordingly, some of
the rules listed may not be relevant to this tool.
5.1 General power tool safety warnings
a)
WARNING
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
instructions for future reference. The term "power tool" in
the warnings refers to your mains-operated (corded) power
tool or battery-operated (cordless) power tool.

5.1.1 Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.

5.1.2 Electrical safety

a) Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
Printed: 26.08.2013 | Doc-Nr: PUB / 5152169 / 000 / 01
en
Save all warnings and
5