Safety Notes; Installation Instructions; Technical Data; Symbol Description - Hansgrohe AXOR Citterio 39850 Serie Mode D'emploi / Instructions De Montage



Safety Notes

Gloves should be worn during installation to prevent

crushing and cutting injuries.
The hot and cold supplies must be of equal pressu-

res.

Installation Instructions

• The fitting must be installed, flushed and tested after
the valid norms!

Technical Data

Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
Hansgrohe mixers can be used together with
hydraulically and thermically controlled continuous flow
heaters if the flow pressure is at least 0,15 MPa.
4
All manuals and user guides at all-guides.com
English
max. 1 MPa
0,1 - 0,5 MPa
1,6 MPa
max. 80°C
65°C

Symbol description

Do not use silicone containing acetic acid!
To adjust the hot water limiter on single lever
mixers, please see page 35. No adjustment
is necessary when using a continuous flow
water heater.
Dimensions (see page 33)
Flow diagram (see page 33)
Operation (see page 34)
Cleaning
see enclosed brochure.
Spare parts (see page 36)
XXX = Colors
000 = chrome plated
800 = stainless steel optic
Test certificate (see page 34)
Assembly see page 31