BASETech 1437197 Mode D'emploi page 49

All manuals and user guides at all-guides.com
• Push the connection line of the mains adapter, the door opener and, if applicable, the network
adapter cable, through the corresponding cable feedthrough in your wall and the wall holder.
Attach the holder to the wall with the screws (and, if required, dowels) from the delivery.
With the screw at the lower centre, you can at the same time attach the holding bracket from
the delivery.
• Now place the rubber seal in the wall holder. Also push all cables through the cable feed-
through.
b) Connection of the outdoor unit
• Connect the two upper terminals of the connection block (B6), the two cables of the mains
adapter. Always observe the proper polarity!
• Connect the door opener to the two lower terminals. The outdoor unit has a potential-free
relay with a resilience of max. 15 V (AC/DC) and max. 2 A. The door opener can be operated
as opener.
Door opener of type "Fail Secure" (working current door opener):
This door opener is commonly used for apartment doors.
The trap lock of the door opener is only unlocked when operating voltage is pending,
e.g. when the door opener button in the apartment is pushed. Then the door can be
opened and the visitor is let in. The door is locked if no operating current is pending.
41