Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions: KIA Soul 2010 and up
8. With one strap loosely mated around the door frame,
hold the other side Strap out from the body side and place
into the door frame. (Fig 2c)
Ensure the rubber pads on the straps are in place to avoid
E
th
bb
d
th
paint damage.
9. Using the supplied "L" wrench tighten the bolts to pull
the Straps up towards the door frame. (Fig 2d)
Tip: While tensioning the Straps alternate from side to
side to ensure even tension on both sides.
Ensure bars are parallel and straps are tightened fully.
Perform a check by tugging on the cross bars.
Attaching Covers to End Supports
Should you need to remove your GTX covers the
following describes the replacement and use.
10. Locate the ends of the Hinge with the Cover
hinge holes. Flex the Hinge ends in and push
through the Cover holes until the capped ends
engage (you'll hear and audible click) (Fig 3a & b)
11. To fully extend the Covers away from the
Support (to access the Accessory Channel or
mounting hardware) Pivot the Cover on the Hinge
while pushing down on the top of the Cover (Fig 3c)
Locking Covers and Mounting Accessories
Locking Covers and Mounting Accessories
12. You are now ready to mount your accessories examples:
Bike, Kayak, luggage carriers by using the global channel if
applicable. "T" bolts are available to mount accessories (Fig 4a)
Be sure to cut your buffer strips to size to completely cover
your channel once the accessories are mounted.
13. Lock all four covers into place using the keys
provided (Fig 4b) . Store your keys in a safe place such
as the glove box or key ring. Replacement locks and
as the glove box or key ring. Replacement locks and
keys are available as service items.
14, Ensure all covers are pushed up hard against the
End Supports (Fig 4 c &d). You'll hear an audible "click"
when the cover is fully engaged.
General Usage Information
* It is essential for the proper assembly, operation and use of the Roof Rack that the
instructions and safety precautions supplied are strictly observed.
instructions and safety precautions supplied are strictly observed
* The maximum permissible load for your roof rack is the lower of the maximum load capacity
specified in you owners manual or specified on your roof rack load label. Do NOT exceed the
maximum load capacity.
Maximum load capacity equals the weight of the rack + accessories + weight of cargo.
Ensure your vehicle's function is not impaired before driving.
Any weight carried on the vehicle will adversely affect its handling particularly in cornering or in a cross wind and the vehicle should
therefore be driven with increased caution
therefore be driven with increased caution.
For lost key replacement or other service items call customer service: 1-800-632-3290 or visit:
Please have lock core number or part numbers available.
Loads should be evenly distributed and secured. REGULARLY CHECK THE TIGHTNESS OF LOCKING STRAPS
59842N Rel. 6/4/10
PULL
t
i
l
t
id
Check the function of all doors and sunroof before driving.
Check the function of all doors and sunroof before driving
Fig 2c
PUSH
Make sure the support hooks
mate with the slots on the
Gasket Pads.
Fig 3a
Printed in China
Fig 2d
Front of Vehicle
Fig 3c
Global
LOCK
Channel
Access
Fig 4a
Fig 4c
www.rolaproducts.com
Front of Vehicle
Fig 3b
Fig 4b
locked
l k d
Un‐locked
CLICK
Fig 4d
Page 2 of 2
Publicité
